VPGD: P216, Tòa nhà Kim Ánh, Số 1 ngõ 78 Duy Tân, Cầu Giấy, HN
 Hot line: +84 986 117 188
Trang chủ»VẬT TƯ TIÊU HAO XƯỞNG HÀN»VẬT TƯ HÀN ELECTROMECH »Weld Gun Arm, Shank, Electrode, Cap & Tip

Weld Gun Arm, Shank, Electrode, Cap & Tip

Weld Gun Arm, Shank, Electrode, Cap & Tip
weld-gun-arm-shank-electrode-cap-tip - ảnh nhỏ  1 weld-gun-arm-shank-electrode-cap-tip - ảnh nhỏ 2

Weld Gun Arm, Shank, Electrode, Cap & Tip

Mã sản phẩm: Weld Gun Arm, Shank, Electrode, Cap & Tip
Hãng sản xuất: Electromech
Xuất xứ: India

Để lại số điện thoại

Lượt xem 14

Kho hàng: 0

CuCrZr material is best suited material of spot welding caps for both coated & non-coated sheets. The additional cost advantages of our (CuCrZr) Cap, Tip and Shank and Adaptor:-
1. RWMA – class 1 copper chromium zirconium (CuCrZr), Conductivity 85% and Hardness 83B.
2. Does not stick on Zr coated materials because the lower welding current and pressure used melt less of the Zr and thus reduce the     diffusion of the Zr into the Cu.
3. Reducing the current by 15 - 20%, which is a big saving of energy & power consumption.
4. Reducing weld force by which weld splatters are minimized
5. Reducing dressing time to more than half that also if necessary, as the cap tip surface does not allow formation of any contamination  like brass coating / carbon.
6. Reduce cap changing downtime.
7. Better weld quality.
8. Increasing Kickless & Aid Cable life.
These above factors ultimately results into more productivity.
Weld Gun Arm, Shank, Electrode, Cap & Tip

Our pursuit of perseverance to register ourselves amidst the elite companies in this domain encourages us to manufacture and supply a commendable range of Weld Gun Arm. These have minimum rockwell hardness of 90B and a minimum electrical conductivity of 45% IACS. Offered products are made available in scores of designs and sizes to meet the diverse needs of the clients. Manufactured at our production unit, the offered products are properly tested before delivering to clients.

• Rugged design
• Durability
• Excellent strength


We are the top manufacturers and suppliers of a supreme quality range of Electrodes Caps, Electrodes Components, Gun Arms And Holders, Seam Welding Wheels, Holders For Stationary Welding Machine, Jumper And Kickless Cables, Electrical Shunts and many more. These products are manufactured by our skilled professionals using the finest grade raw material, which is procured from trustworthy vendors of the industry.

Further, these components are widely treasured by our clients due to their features like high durability, dimensional accuracy, robust construction, excellent strength and fine finish. The offered components are available in different specifications and can also be customized as per the diverse requirements of our esteemed customers.

Fabricated electrode arms are manufactured for electrode sizes of Ø 100-800mm for UHP-furnaces, AC-electric arc furnaces, DC-electric arc furnaces and ladle furnaces.

Due to their outstanding design and optimal materials, our electrode arms deliver lower electric operating costs, low graphite consumption, higher process speed, easy handling, optimal symmetry and maximum efficiency.

Current Conducting Copper/Steel Electrode Arms
Current conducting electrode arms are a melt shop proven design that  provide efficient cooling as well as reduced electrical loss. The utilization of the copper clad (copper & steel) arms combines the high strength of steel with the high conductivity and current carrying ability of copper.

Typical Copper Grades and Copper Alloys
C11000, Electrolytic Tough Pitch Copper (ETP)
C10100 and C10200, Oxygen Free Coppers (OFHC)

Advantages of Copper/Steel Electrode Arms
For Ø 100-800 mm sized electrodes
Low operating costs
Minimal shutdown times
Easy handling
Optimum symmetry
Highest efficiency level

Current Conducting Aluminum Electrode Arms
Lighter aluminum current conducting electrode arms are available if less stress for the mechanical system is required.
The weight advantage of aluminum electrode arms are optimal for modernization of existing furnaces, with less need for changing peripheral structural components.

Advantages of Aluminum Electrode Arms
For Ø 100-800 mm sized electrodes
Weight saving of 30%
Low electrical resistance
Better control dynamics
Easier maintenance
Better regulating performance

Conventional Steel Electrode Arms 
Steel arm fabrication with insulated copper bus tubes.

Electrode Arm Specifications and Features
Spare part components are exchangeable – copper/steel to aluminum
Electrode arms designed for 2 electrode sizes
Easy clamping system
Clamping force measuring device [patent EP03794958.3-2122]
Optimized cooling water flow according to customer request
Individual temperature monitoring of single components possible
Electrode guidance device
Spray ring with heat protection shield and ceramic coating
Blow–off device for contact service
Transport hook (for aluminum only)
Easy fastening system to column
Life time optimized contact jaw [patent PCT/EP2005/000732)
Easily changeable cable sword


1. This is the basic cap material having a composition of 1% Chromium, 0.1% Zirconium; balance Copper – nominal.
2. The nominal hardness of a cold forged Chromium Zirconium Copper cap is 85HRB, which results in long working life of the cap.
3. The Zirconium in the cap prevents brassing up during welding of galvanized steels.
4. Since it is Mipalloy’s most popular cap material, standard designs are always available ex stock off the shelf.
5. It is the lowest cost spot welding cap material.
6. Chromium Zirconium Copper has a large application window and can be used for welding majority of jobs including plain Cold rolled and cold annealed steels, galvanized steels, Nickel steels and Terne coated steel sheets.
7. Chromium Zirconium Copper is designated Mipalloy 3ZR.
8. Other international nomenclature include.

CDA’s UNS no- C18150
CMW’s - CMW328
Mallory’s - Mallory 328
KME’s - Elbrodur HF & G,
TDM’s - Elmedur XS,

Liên hệ


Địa chỉ: Số 415, phố Thanh Bình , Phường Mộ Lao, Quận Hà Đông, Thành phố Hà Nội, Việt Nam

VPGD: Phòng 216, Tòa nhà Kim Ánh, Số 1 ngõ 78 Duy Tân, Cầu Giấy, Hà Nội

Phone: +84 24 629 15 369

Mobile: +84 986 117 188

Email: support@subinvina.com